BANDED MICROSTRUCTURE IN FORGED 18CrNiMo7-6 STEEL
نویسندگان
چکیده
منابع مشابه
Investigation of Grain Flow Microstructure in Forged Nitronic 50 Stainless Steel
Samples were sectioned with observation surface parallel to the normal of the short transverse direction (ST) that were removed from Block B as shown in Figures 1 and 2. A sample was polished and then etched with Agua Regia. The sample was then analyzed in a Leica MEF4M metallograph to observe microstructure and then analyzed in a Zeiss 1540 XB Field Emission Gun Scanning Electron Microscope (F...
متن کاملEffect of Composition and MnS Addition on Microstructure and Mechanical Properties of Powder Forged Copper Steel Parts
In this work, the effects of carbon content and manganese sulfide addition on the microstructure and mechanical properties of copper steel parts have been studied. Steel powder mixture containing 2%Cu and different graphite contents with and without MnS additions were compacted, sintered and forged to almost full density. Forged samples, with near theoretical densities, were tested for tensile,...
متن کاملFatigue Performance of Forged Steel and Ductile Cast Iron Crankshafts
Fatigue is the primary cause of failure of crankshafts in internal combustion engines. The cyclic loading conditions and the stress concentrations in the crank pin fillets are unavoidable, and can result in fatigue failure. The objectives of this study were to compare the fatigue behavior of forged steel and ductile iron crankshafts from a one-cylinder engine as well as to determine if the fati...
متن کاملStrain Evolution in Cold-Warm Forged Steel Components Studied by Means of EBSD Technique
Electron BackScatter Diffraction (EBSD) in conjunction with Field-Emission Environmental Scanning Electron Microscopy (FEG-ESEM) has been used to evaluate the microstructural and local plastic strain evolution in different alloys (AISI 1005, AISI 304L and Duplex 2205) deformed by a single-stage cold and warm forging process. The present work is aimed to describe the different behavior of the au...
متن کاملModelling the Evolution of Microstructure in Steel Weld Metal
Physical models for the development of microstructure have the potential of revealing new phenomena and properties. They can also help identify the controlling variables. The ability to model weld metal microstructure relies on a deep understanding of the phase transformation theory governing the changes which occur as the weld solidifies and cools to ambient temperature. Considerable progress ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgy and Foundry Engineering
سال: 2009
ISSN: 1230-2325
DOI: 10.7494/mafe.2009.35.1.45