Axial dispersion characteristics of three phase fluidized beds.
نویسندگان
چکیده
منابع مشابه
An Electrical Conductivity Method for Axial Gas and Solid Holdup Determination in Three Phase Fluidized Beds
ISSN 2277 5056 | © 2012 Bonfring Abstract--Fluidization is an operation in which solid particles are kept under suspension supported by the upward flow of liquid/gas phase. In classic fluidization the solids density are higher than the liquid, where as in Inverse fluidization the solids density are lower than that of continuous liquid phase. The phase holdup measurements in three phase classic/...
متن کاملFlow through Packed Beds and Fluidized Beds
Chemical engineering operations commonly involve the use of packed and fluidized beds. These are devices in which a large surface area for contact between a liquid and a gas (absorption, distillation) or a solid and a gas or liquid (adsorption, catalysis) is obtained for achieving rapid mass and heat transfer, and particularly in the case of fluidized beds, catalytic chemical reactions. You wil...
متن کاملImproving Three Phase Modeling of Fluidized Bed Dryer
Heat transfer phenomena in batch fluidized bed dryer have been studied and analyzed using three phase model including solid phase, interstitial gas phase and bubble phase based on Rizzi model. New correlations of heat transfer coefficient to surrounding and convection heat transfer coefficient between solid and interstitial gas are being proposed. In addition, some modifications have been d...
متن کاملOperation diagram of Circulating Fluidized Beds (CFBs)
CFBs are widely used in the chemical, mineral, environmental and energy process industries. Several authors stressed the need for a clear identification of the different operation regimes in the riser of a CFB, to ensure a better comprehension of the hydrodynamic context, and thus better define the operation and design parameters.. First approaches to develop a "work map" of the riser operation...
متن کاملGranular Pressure Measurement in Fluidized Beds
Experiments were carried out to measure the additional pressure, called the granular pressure, which is exerted on the containing wail of a fluidized bed due to particle collisions with that wall. Measurements were made for water fluidized beds using glass beads of 1.3 mm and 3 mm diameter, lead shot of 2.1 mm diameter and plastic particles. The granular pressure was observed to increase to a m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
سال: 1983
ISSN: 0021-9592,1881-1299
DOI: 10.1252/jcej.16.172