Axial compression behaviour of retrofitted long timber columns
نویسندگان
چکیده
منابع مشابه
Axial compression behaviour of retrofitted long timber columns
Spliced joints are used widely in retrofitting traditional timber structures, especially in heritage conservation applications where as much original material as possible needs to be retained. However, in practice this method is mainly applied based on experience, and there is a lack of understanding and quantification of the mechanical behaviour of retrofitted timber members. This paper presen...
متن کاملBehaviour of FRP strengthened concrete columns under eccentric compression loading
This paper presents results of testing eccentrically loaded columns externally wrapped with two types of materials. Six cylindrical (205 mm diameter and 925 mm height) plain columns were cast and tested. Half of the columns were wrapped with GFRP and the other half with CFRP. All columns were tested by applying an axial load at 50 mm eccentricity. In each group (GFRP or CFRP wrapped) of columns...
متن کاملAnalysis of Carbon Fiber Sheet Retrofitted Rc Bridge Columns
Experimental studies were conducted by some researchers to investigate the cyclic performance of CFSretrofitted columns; however there is a need to develop analytical methods which can simulate its hysteretic response. This study presents an analysis of the hysteretic behavior of CFS-retrofitted reinforced concrete circular columns. Fiber element analysis was conducted based on cyclic constitut...
متن کاملDerivation of the Bi-axial Bending, Compression and Shear Strengths of Timber Beams
The derivation is given of the combined bi-axial bending, compression and shear strength of timber beams. As for other materials the elastic–full plastic limit design approach applies, which is known to precisely explain and predict uniaxial bending strength behaviour. The derivation is based on choosing the location of the neutral line. This provides the stress distribution in the beam cross s...
متن کاملNeural Networks Method Applied to the Property Study of Steel-concrete Composite Columns under Axial Compression
In this paper, a new type of steel-concrete composite member, concrete-filled core steel tube with outer angle steel plank reinforced concrete stub column, is proposed and a series of nonlinear 3D(three-dimensional) full-range numerical calculations under axial compression are carried out, some important factors are analyzed, such as the strength of the concrete, the steel tube and the angle st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Structural Engineering
سال: 2017
ISSN: 1369-4332,2048-4011
DOI: 10.1177/1369433217719984