Avoiding FIB damage using the “umbrella” method
نویسندگان
چکیده
منابع مشابه
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
FIB Sample Preparation of Polymer Thin Films on Hard Substrates Using the Shadow-FIB Method
Focused ion beam (FIB) instrumentation has proven to be extremely useful for preparing cross-sectional samples for transmission electron microscopy (TEM) investigations. The two most widely used methods involve milling a trench on either side of an electron-transparent window: the “H-bar” and the “lift-out” methods [1]. Although these two methods are very powerful in their versatility and abili...
متن کاملStudy of the Frictional Surface Damage Using Acoustic Emission Method
In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...
متن کاملTEM Sample Preparation and FIB-Induced Damage
Joachim Mayer, Lucille A. Giannuzzi, Takeo Kamino, and Joseph Michael preparation can be applied to almost any material type—hard, soft, or combinations thereof. The number of materials for which successful TEM sample preparation with FIBs has been documented certainly reaches several hundred and spans from hard matter such as metals, ceramics, and composites to soft matter including polymers, ...
متن کاملAvoiding Moisture Damage
T he demands of the automotive industry on components are increasing continuously and thus time and again raise new challenges for the materials used. That means that plugs, plug connectors and housings for electronic components (Title picture) as well as overmolded sensors for under the hood applications which are often made from polybutylene terephthalate (PBT) have to pass even harder tests....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2019
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927619004987