Availability analysis of railway track circuits
نویسندگان
چکیده
منابع مشابه
Dynamic Analysis of Railway track
In the present analysis, an infinite Euler– Bernoulli beam of constant cross-section resting on an elastic foundation is considered. The beam and foundation are assumed to be homogeneous and isotropic. The foundation is modeled using one parameter without damping. The beam is subjected to a constant point load moving with a constant speed along the beam. An effort has been made to find the solu...
متن کاملReal Time Railway Traffic Management Modeling Track-Circuits
The real time railway traffic management seeks for the train routing and scheduling that minimize delays after an unexpected event perturbs the operations. In this paper, we propose a mixedinteger linear programming formulation for tackling this problem, modeling the infrastructure in terms of track-circuits, which are the basic components for train detection. This formulation considers all pos...
متن کاملInvestigation of the Influences of Track Superstructure Parameters on Ballasted Railway Track Design
The main design criteria of ballasted railway tracks include rail deflections, rail bending stresses, rail wheel contact stresses, sleeper bending moments and ballast sleeper contact pressures. Numerous criteria have been defined for the design of ballasted railway tracks owing to the various mechanical properties of track components and their complex interaction. Therefore, railway track desig...
متن کاملSquare Joints in Railway Track Waves
When rails are laid in a railway track, small gaps are left between the ends of adjoining rails to allow for the expansion of the rails when the temperature rises. Rail joints are provided to form a continuous rail path which are normally laid in standard lengths bolted together by fishplates. When two rail joints are exactly opposing each other, they are called square (side by side) joints...
متن کاملSquare Joints in Railway Track Waves
When rails are laid in a railway track, small gaps are left between the ends of adjoining rails to allow for the expansion of the rails when the temperature rises. Rail joints are provided to form a continuous rail path which are normally laid in standard lengths bolted together by fishplates. When two rail joints are exactly opposing each other, they are called square 

(side by side) jo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
سال: 2010
ISSN: 0954-4097,2041-3017
DOI: 10.1243/09544097jrrt296