Automation on thermal control of blast furnace

Development of Blast Furnace Burden Distribution Process Modeling and Control

1) School of Automation and Electrical Engineering, University of Science and Technology Beijing, Beijing, 100083 China. 2) Key Laboratory of Advanced Control of Iron and Steel Process (Ministry of Education), University of Science and Technology Beijing, Beijing, 100083 China. 3) Department of Electrical & Computer Engineering, Missouri University of Science and Technology, Rolla, MO, 65409-00...

The Automation Control System Design of Walking Beam Heating Furnace

Combining the transformation project of certain strip steel rolling production line, the techniques process of walking beam heating furnace was elaborated in this paper. The practical application of LOS-T18-2ZC1 laser detector was elaborated. The network communication model of walking beam heating furnace control system was designed. The realization method of production process automation contr...

.o Introduction 2.0 Background 3.0 Project Test Plan 4.0 Blast Furnace Operations 4.1 Blast Furnace Operating Conditions 4.2 Blast Furnace Trial Results Using Granular and Pulverized High Volatile Coal 4.3 Furnace Thermal Conditions and Lining Wear

Ground Granulated Blast Furnace Slag

1. Ground Granulated Blast Furnace Slag Ground Granulated Blast Furnace Slag (GGBFS) is a by product of the steel industry. Blast furnace slag is defined as “the non-metallic product consisting essentially of calcium silicates and other bases that is developed in a molten condition simultaneously with iron in a blast furnace.” [1] In the production of iron, blast furnaces are loaded with iron o...

EFFECTS OF SILICA MODULUS AND ALKALI CONCENTRATION ON ACTIVATION OF BLAST-FURNACE SLAG

Abstract: The use of alkali-activated cementitious materials especially over the past decades has significantly been increased. The goal of this research is to investigate the effects of silica modulus and alkali concentration on alkali-activation of blast-furnace slag. In this research, the most important physical characteristics of cementitious systems, i.e. the 28-day compressive strength...