AUTOMATING THE MODELLING PROCESS OF INVOLUTE SPUR GEARS WITH STRAIGHT TEETH
نویسندگان
چکیده
منابع مشابه
Geometry Definition and Contact Analysis of Spherical Involute Straight Bevel Gears
A practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. Conjugate (pure involute) theoretical surfaces are developed from the input design parameters. The surfaces are modified to suit the actual application (automotive differential). The unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملMeasuring Geometrical Parameters of Involute Spur Gears to Sub-pixel Resolution
The problem of accurate determination of the position, orientation and width of involute spur gear teeth using a single front-lit image is addressed. The information is used to compute global measures of tooth concentricity and pitch variations across a gear wheel. The approach is based on the use of specialised filters which make maximum use of the grey level information available in the image...
متن کاملImplementation of the Spur Involute Gear Model on Modelica
A procedure to build up a dynamical model of the gearbox with spur involute mesh is being described. The main attention is paid to the design technology of the cylindrical bodies elastic contact models. To track geometry of contact implicit equations of algebraic/transcendental or differential-algebraic type are being used. At the same time dynamical models of the bodies involved, gearwheels an...
متن کاملgeometry definition and contact analysis of spherical involute straight bevel gears
a practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. conjugate (pure involute) theoretical surfaces are developed from the input design parameters. the surfaces are modified to suit the actual application (automotive differential). the unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملSpatial involute gearing - a new type of skew gears
This is a geometric approach to spatial involute gearing which has recently been developed by Jack Phillips [4]. Due to Phillips' fundamental theorems helical involute gears for parallel axes (Fig. 2) serve also as tooth flanks for a uniform transmission between skew axes, and the transmission ratio is even independent of the relative position of the axes.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Science and Technology – Research Journal
سال: 2013
ISSN: 2080-4075,2299-8624
DOI: 10.5604/20804075.1062369