Automatic Welding of High Carbon Hoop Steels
نویسندگان
چکیده
منابع مشابه
Laser welding of modern automotive high strength steels
The paper demonstrates the correlation between the chemical composition of steel grades and the hardness as well as the formability of laser welds generated with modern automotive high strength steel grades. At the very low heat input of industrial laser welding and the resulting extremely high cooling rate, the weld hardness is fully controlled by the carbon content of the base materials and n...
متن کاملTRIP-assisted steels: cracking of high-carbon martensite
Modern TRIP assisted steels contain retained austenite with carbon concentrations in excess of 1 wt-%. Some of their mechanical properties, in particular the toughness and ductility, rely on the diffusionless transformation of this austenite into high-carbon martensite, induced by stress and strain. The properties can be excellent in spite of the fact that freshly formed high-carbon martensite ...
متن کاملProblems in Repair-welding of Duplex-treated Tool Steels
Castings of aluminum and plastics are of high importance in the industrial world. They are usually made using permanent metallic moulds for pressure die-castings and injection molding. Die-tools are usually produced from chromium maraging hot work tool steel and are heat treated to hardness between 29 and 48 HRC, 1-3 . Die life is a mayor factor of a die-casting process and it strongly affects ...
متن کاملResistance Spot Welding of Steels: Modeling and Simulation
Resistance spot welding (RSW) includes many variables that can influence the weld properties. The purpose of this study is to develop an analytical model for prediction of thermal history and weld microstructure in RSW and to find the most important process parameters that influence the weld microstructure. A one dimensional model is proposed for prediction about thermal history during cooling ...
متن کاملHigh-Strength Bainitic Steels
With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DENKI-SEIKO[ELECTRIC FURNACE STEEL]
سال: 1974
ISSN: 1883-4558,0011-8389
DOI: 10.4262/denkiseiko.45.27