Automated determination of interfacial tension and contact angle using computer vision for oil field applications
نویسندگان
چکیده
Abstract Contact angle and surface tension are the two most widely used analysis approaches for reservoir fluid characterization in petroleum industries. The pendant drop method has among techniques estimation of tension. present work utilizes a python-based computer program to automatically determine interfacial (IFT) contact from image acquired typical apparatus. proposed uses processing libraries image. Also, is tested on images standard solutions IFT calculation showing promising results with deviation less than 1.7 mN/m.
منابع مشابه
Effect of Hexadecyl Trimethyl Ammonium Bromide (C16TAB) as Cationic Surfactant on Contact Angle and Interfacial Tension of Carbonate Rocks and Oil
متن کامل
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
development of different optical methods for determination of glucose using cadmium telluride quantum dots and silver nanoparticles
a simple, rapid and low-cost scanner spectroscopy method for the glucose determination by utilizing glucose oxidase and cdte/tga quantum dots as chromoionophore has been described. the detection was based on the combination of the glucose enzymatic reaction and the quenching effect of h2o2 on the cdte quantum dots (qds) photoluminescence.in this study glucose was determined by utilizing glucose...
Developing a Compositional Reservoir Model for Investigating the Effect of Interfacial Tension on Oil Recovery
In this paper, a simplified formulation for compositional reservoir simulator is presented. These types of simulators are used when inter-phase mass transfer depends on phase composition as well as pressure. The procedure for solving compositional model equations is completely described. For equilibrium calculation, property estimation Peng Robinson equation of state is used. This equation ...
متن کاملWater‐CO2‐mineral systems: Interfacial tension, contact angle, and diffusion—Implications to CO2 geological storage
[1] The interfacial interaction between mineral surfaces and immiscible fluids determines the efficiency of enhanced oil or gas recovery operations as well as our ability to inject and store CO2 in geological formations. Previous studies have shown that the interfacial tension and contact angle in CO2‐water‐mineral systems change noticeably with fluid pressure. We compile previous results and e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Petroleum Exploration and Production Technology
سال: 2021
ISSN: ['2190-0566', '2190-0558']
DOI: https://doi.org/10.1007/s13202-021-01398-6