Auto Skid Packing by Polyethylene Shrink Film.
نویسندگان
چکیده
منابع مشابه
Occupational asthma due to polyethylene shrink wrapping (paper wrapper's asthma).
Occupational asthma due to the pyrolysis products of polyvinyl chloride (PVC) produced by shrink wrapping processes has previously been reported. The first case of occupational asthma in a shrink wrap worker using a different plastic, polyethylene, is reported; the association was confirmed by specific bronchial provocation testing.
متن کاملShrink-film microfluidic education modules: Complete devices within minutes.
As advances in microfluidics continue to make contributions to diagnostics and life sciences, broader awareness of this expanding field becomes necessary. By leveraging low-cost microfabrication techniques that require no capital equipment or infrastructure, simple, accessible, and effective educational modules can be made available for a broad range of educational needs from middle school demo...
متن کاملViscoplastic tearing of polyethylene thin film
Recent advances in non-contact strain measurement techniques and large-strain constitutive modeling of the Linear Low-Density Polyethylene film used in NASA Superpressure balloons, StratoFilm 420, are combined to provide a novel measurement technique for the tear propagation critical value of the J-integral. Previously these measurements have required complex test configurations and procedures....
متن کاملShrink film patterning by craft cutter: complete plastic chips with high resolution/high-aspect ratio channel.
This paper presents a rapid, ultra-low-cost approach to fabricate microfluidic devices using a polyolefin shrink film and a digital craft cutter. The shrinking process (with a 95% reduction in area) results in relatively uniform and consistent microfluidic channels with smooth surfaces, vertical sidewalls, and high aspect ratio channels with lateral resolutions well beyond the tool used to cut ...
متن کاملDetermination of percent polyethylene in polyethylene/polypropylene blends using cast film FTIR techniques
Polyethylene (PE) is the most common group of thermoplastic polymers due to its low cost and versatile physical properties. PE is blended with polypropylene (PP) to improve physical properties, such as low temperature impact performance. The composition of these blends is important with regard to performance, and the correct mixing of the pure homopolymers (PE and PP) can eliminate the need for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JAPAN TAPPI JOURNAL
سال: 1994
ISSN: 0022-815X,1881-1000
DOI: 10.2524/jtappij.48.180