Austenite Grain Growth Analysis in a Welded Joint of High-Strength Martensitic Abrasion-Resistant Steel Hardox 450
نویسندگان
چکیده
منابع مشابه
Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets
Currently, advances due to tailored blanking can be enhanced by the development of new grades of advanced high-strength steels (HSSs), for the further weight reduction and structural improvement of automotive components. In the present work, diode laser welds of three different grades of advanced high-strength dual-phase (DP) steel sheets (with tensile strengths of 980, 800, and 450 MPa) to hig...
متن کاملThe Effect of Precipitate Evolution on Austenite Grain Growth in RAFM Steel
To study the effects of various types of precipitates and precipitate evolution behavior on austenite (size and phase fraction) in reduced activation ferritic/martensitic (RAFM) steel, RAFM steel was heated to various austenitizing temperatures. The microstructures of specimens were observed using optical microscopy (OM) and transmission electron microscopy (TEM). The results indicate that the ...
متن کاملThe Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel
The grain size refinement of AISI 422 martensitic stainless steel in the temperature range of 950-1150 ºC was investigated by hot deformation tests. The deformed specimens were held at deformation temperature with delay times of 5 to 300s after achieving a strain of 0.3. The austenite grains exhibit a considerable growth at temperature higher than 1050˚C, while the grain coarsening is negligibl...
متن کاملThe Effect of Variable Loading on Integrity of a Welded Joint of High Alloy-steel X20
Z. Burzić, Military Technical Institute, Belgrade, Serbia. Dž. Gačo, F. Islamović, E. Bajramović, Technical faculty, University of Bihac,Bihac, Bosnia and Herzegovina. M. Burzić, University of Belgrade, I.C. Faculty of Mechanical Engineering, Belgrade, Serbia. In present paper, experimental investigations have included the eff ect of exploitation conditions (exploitation time and temperature) o...
متن کاملProspect of High-performance Welded Steel Bridge
The development of several grades of high-performance steel (HPS) with yield strengths of the order of 480 to 690 MPa (even more) with improved weldability, toughness and corrosion resistance have changed the scenario of fabrication of welded steel bridges for highway and rail bridge constructions. The HPS possesses the optimum combination of properties required to build cost-effective structur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2021
ISSN: 1996-1944
DOI: 10.3390/ma14112850