Augmentation of the Critical Heat Flux in Water-Al2O3, Water-TiO2and Water-Cu Nanofluids

FLOW VISUALIZATION AND STUDY OF CRITICAL HEAT FLUX ENHANCEMENT IN POOL BOILING WITH Al2O3-WATER NANOFLUIDS

Pool boiling heat transfer characteristics of Al2O3 -water nanofluids is studied experimentally using a NiCr test wire of 36 standard wire guage diameter. The experimental work mainly concentrated on (1) change of critical heat flux with different volume concentrations of nanofluid and (2) flow visualization of pool boiling using a fixed concentration of nanofluid at different heat flux values....

Pool boiling of water-Al2O3 and water-Cu nanofluids on horizontal smooth tubes

Experimental investigation of heat transfer during pool boiling of two nanofluids, i.e., water-Al2O3 and water-Cu has been carried out. Nanoparticles were tested at the concentration of 0.01%, 0.1%, and 1% by weight. The horizontal smooth copper and stainless steel tubes having 10 mm OD and 0.6 mm wall thickness formed test heater. The experiments have been performed to establish the influence ...

Thermal Property Measurement of Al2O3-Water Nanofluids

Critical Heat Flux in Subcooled Flow Boiling of Water

Viscosity affected by nanoparticle aggregation in Al2O3-water nanofluids

An investigation on viscosity was conducted 2 weeks after the Al2O3-water nanofluids having dispersants were prepared at the volume concentration of 1-5%. The shear stress was observed with a non-Newtonian behavior. On further ultrasonic agitation treatment, the nanofluids resumed as a Newtonian fluids. The relative viscosity increases as the volume concentrations increases. At 5% volume concen...