Au Film Electrodes on CdZn Te Surface: Preparation and Ohmic Contact Property
نویسندگان
چکیده
منابع مشابه
ELECTROCHEMICAL BEHAVIOR OF GC, Pt AND Au ELECTRODES MODIFIED WITH THIN FILM OF COBALT HEXACYANOFERRATE
0A thin film of cobalt hexacyanoferrate (CoHCF), an analogue of mixed-valence Prussian blue, was deposited electrochemically on the glassy carbon, platinum and gold electrode surfaces in 0.5M KC1 solution. The electrochemical behavior of these modified electrodes show three couples of redox peaks by CV in a supporting electrolyte solution of 0.5M NaCl, whereas for Au modified electrode only ...
متن کاملHigh-transparency Ni/Au ohmic contact to p-type GaN
In this study, a very thin Ni/Au bilayer metal film was prepared by electron beam evaporation and thermal alloying to form ohmic contact on p-type GaN film. After thermal alloying, the current– voltage (I – V) characteristic of Ni/Au contact on p-type GaN film exhibited ohmic behavior. The Ni/Au contacts showed a specific contact resistance of 1.7310 V cm at an alloying temperature of 450 °C. I...
متن کاملInvestigation of post-annealing effect on efficient ohmic contact to ZnO thin film using Ti/Al metallization strategy
Ohmic and Schottky contacts are playing a major role in the field of ZnO based electronics device fabrication. It is seen that several works have been reported on metallization scheme, contacts with this semiconducting material. But, the thickness of semiconducting material and the choosing of substrate still remain imperfect and inefficient for advanced IC technology. To estimate contact resis...
متن کاملFocused ion beam processing to fabricate ohmic contact electrodes on a bismuth nanowire for Hall measurements
Ohmic contact electrodes for four-wire resistance and Hall measurements were fabricated on an individual single-crystal bismuth nanowire encapsulated in a cylindrical quartz template. Focused ion beam processing was utilized to expose the side surfaces of the bismuth nanowire in the template, and carbon and tungsten electrodes were deposited on the bismuth nanowire in situ to achieve electrical...
متن کاملElectrical characterization and nanoscale surface morphology of optimized Ti/Al/Ta/Au ohmic contact for AlGaN/GaN HEMT
Good ohmic contacts with low contact resistance, smooth surface morphology, and a well-defined edge profile are essential to ensure optimal device performances for the AlGaN/GaN high electron mobility transistors [HEMTs]. A tantalum [Ta] metal layer and an SiNx thin film were used for the first time as an effective diffusion barrier and encapsulation layer in the standard Ti/Al/metal/Au ohmic m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Inorganic Materials
سال: 2018
ISSN: 1000-324X
DOI: 10.15541/jim20170186