Atomization of a High Speed Liquid Jet by Wall Impingement
نویسندگان
چکیده
منابع مشابه
Subgrid analysis of liquid jet atomization
The objective of this paper is to study the feasibility of large eddy simulations of a liquid fuel injection in combustion chambers. To do so, a priori analyses of direct numerical simulations are carried out. A complete liquid jet atomization, from the injector down to the end of the liquid core, is simulated thanks to the coupling of both level-set and VOF formulations. To avoid the apparitio...
متن کاملHigh-fidelity Simulation of High Density-Ratio Liquid Jet Atomization in Crossflow with Experimental Validation
Liquid jet atomization in cross-flowing gas is a critical phenomenon in the fuel preparation process and controls combustor efficiency and emissions. Quantitative experimental studies of atomization have been rare due to limited optical access to the near-field dense spray region. High fidelity multiphase flow simulation has shown promise as an alternative approach for scrutinizing the complex ...
متن کاملModeling of Turbulence Effects on Liquid Jet Atomization
Recent experimental investigations and physical modeling studies have indicated that turbulence behaviors within a liquid jet have considerable effects on the atomization process. For certain flow regimes, it has been observed that the liquid jet surface is highly turbulent. This turbulence characteristic plays a key role on the breakup of the liquid jet near to the injector exit. Other experim...
متن کاملNumerical Simulation of Liquid Jet Atomization Including Thrbulence Effects
This paper describes numerical implementation of a newly developed hybrid model, T-bbb/7'-TAB, into an existing computational fluid dynamics (CFD) program for primary and secondary breakup simulation of liquid jet atomization. This model extend two widely used models, the Kelvin-Helmholtz (KH) instability of Reitz (blob model) and the Taylor-Analogy-Breakup (TAB) secondary droplet breakup by O'...
متن کاملShadowgraphy investigations of high speed water jet atomization into still air
Abstract The present study aims at characterizing the atomization of a water jet which is injected at high velocity into still air thanks to an industrial nozzle particularly used in irrigation. The nozzle diameter is 4.36 mm and exit velocity is about 25 m/s. The droplet size and velocity are analyzed by a double-pulsed shadowgraph imaging technique using a Droplet Tracking Velocimetry (DTV) m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2005
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.71.978