Atomic Level Characterization of Novel Hardening Mechanisms in High-Mn-Steels

Secondary Hardening in High Speed Steels

High-Alloy Ferritic Steels: Martensitic Stainless Steels, Precipitation Hardening (code 1810)

This report may be updated and revised periodically in response to the needs of the technical community; up-to-date versions can be requested from the editors at the address given below or downloaded at http://www.ca.sandia.gov/matlsTechRef/. The content of this report will also be incorporated into a Sandia National Laboratory report (SAND2008-1163); the most recent version can be obtained fro...

Duplex Hardening of Steels for Aeroengine Bearings

Duplex hardening is a process in which conventional heat-treatments such as secondary or case hardening are followed up by surface nitriding to achieve exceptional properties, particularly in the context of aeroengine bearings. Hardness values in excess of 1 000 HV can in principle be achieved, and although the hardness decreases as a function of depth below the surface, some level of enhanceme...

Neural-Network Analysis of Irradiation Hardening in Low-Activation Steels

An artificial neural network has been used to model the irradiation hardening of lowactivation ferritic/martensitic steels. The data used to create the model span a range of displacement damage of 0 90 dpa, within a temperature range of 273 973 K and contain 1800 points. The trained model has been able to capture the non-linear dependence of yield strength on the chemical composition and irradi...

High Strain Rate Characterization of Advanced High Strength Steels