Athermalized Polymeric Arrayed-Waveguide Grating by Partial Detachment from a Si Substrate
نویسندگان
چکیده
منابع مشابه
Arrayed Waveguide Grating Router
This paper discusses design, fabrication, and characterization of a 512 × 512 arrayed waveguide grating router (AWGR) with a channel spacing of 25 GHz. The dimensions of the AWGR is 16 mm × 11 mm and is fabricated on a 250 nm silicon-on-insulator platform. The measured channel crosstalk is approximately −4 dB without any compensation for the phase errors in the arrayed waveguides. The AWGR spec...
متن کاملArrayed Waveguide Grating of 70 Â 60 Lm 2 Size Based on Si Photonic Wire Waveguides
A miniature arrayed waveguide grating of 70 60 mm size consisting of Si photonic wire waveguides was designed using complete modelling in the finite-difference time-domain simulation. The device was fabricated onto a silicon-on-insulator substrate and evaluated in the wavelength range around 1.55 mm. The clear demultiplexing characteristics were observed with a channel spacing of 11 nm and a lo...
متن کاملDesign of a High Index Contrast Arrayed Waveguide Grating
Arrayed waveguide gratings are useful structures for the implementation of wavelength division multiplexing; however, in their current form, silica-based gratings are too large to be made cheaply or to use as an integrated component. This paper describes a Master of Engineering thesis which will attempt to design such a structure which is at least one order of magnitude smaller than the best on...
متن کاملArrayed-waveguide-grating light collector for on-chip spectroscopy
We present a novel arrayed-waveguide-grating (AWG) device with improved external (biomedical) signal collection for use in on-chip spectroscopy. The collection efficiency of the device is compared to that of a standard AWG. We also present experimental results on the collection efficiency and size of the collection volume. Keywords-arrayed waveguide grating; spectroscopy; integrated optics
متن کاملDesign of Optical Demultiplexer using Arrayed Waveguide Grating
Optical demultiplexers are used to receive multiple frequency signal from an optical fiber and to split it into its different frequency components. Arrayed waveguide gratings can be used to design an optical demultiplexer and works on the principle of interferometry. This paper presents the design of optical demultiplexer for an optical signal composed of eight frequency components. Simulation ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ETRI Journal
سال: 2004
ISSN: 1225-6463
DOI: 10.4218/etrij.04.0203.0027