Asymmetrical Compound-Angle on Combined-Hole Film Cooling
نویسندگان
چکیده
منابع مشابه
Film Cooling Measurements for Novel Hole Configurations
The effect of film cooling slot exit area and shape is studied. Detailed heat transfer coefficient and film effectiveness measurements are obtained simultaneously using a single transient IR thermography technique. Two designs with a crescent shaped exit and a slot exit are considered. The results show that the crescent shaped exit provides significantly higher film cooling effectiveness than t...
متن کاملNumerical Investigation of Effects of Compound Angle and Length to Diameter Ratio on Adiabatic Film Cooling Effectiveness
A modification has been done in the normal injection hole of 35◦, by injecting the cold fluid at different angles(compound angle) in lateral direction, providing a significant change in the shape of holes which later we found in our numerical investigation giving good quality of effectiveness in cooling. Different L/D ratios are also studied for each compound angle. The numerical simulation is ...
متن کاملFilm Effectiveness Downstream of a Row of Compound Angle Film Holes
Effects that two different compound-angle film-hole configurations have on film cooling effectiveness are investigated. Effectiveness measurements have been made downstream of a single row of compound-angle cylindrical holes with a diameter of 7.5 mm, and a single row of compound-angle, diffuser-shaped holes with an inlet diameter of 7.5 mm. Both geometries were inclined with respect to the cov...
متن کاملEffects of Various Modeling Schemes on Mist Film Cooling Simulation
Numerical simulation is performed in this study to explore filmcooling enhancement by injecting mist into the cooling air with a focus on investigating the effect of various modeling schemes on the simulation results. The effect of turbulence models, dispersed-phase modeling, inclusion of different forces (Saffman, thermophoresis, and Brownian), trajectory tracking, and mist injection scheme is...
متن کاملSimulation of Mist Film Cooling on Rotating Gas Turbine Blades
Film cooling technique has been successfully applied to gas turbine blades to prevent it from the hot flue gas. However, a continuous demand of increasing the turbine inlet temperature to raise the efficiency of the turbine requires continuous improvement in film cooling effectiveness. The concept of injecting mist (tiny water droplets) into the cooling fluid has been proven under laboratory co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CFD Letters
سال: 2020
ISSN: 2180-1363
DOI: 10.37934/cfdl.12.3.5057