Assessment of tensile behaviour of an Al–Mg alloy composite reinforced with NiAl and oxidized NiAl powder particles helped by nanoindentation
نویسندگان
چکیده
منابع مشابه
Tensile Creep of Polycrystalline Near-Stoichiometric NiAl
Long term tensile creep studies were conducted on binary NiAl in the temperature range 700-1200 K with the objectives of characterizing and understanding the creep mechanisms. Inverse and normal primary creep curves were observed depending on stress and temperature. It is concluded that the primary creep of NiAl is limited by dislocation mobility. The stress exponent for creep, n, decreased fro...
متن کاملEffect of heat treatments at 520oC on an aluminium alloy matrix composite reinforced with Ni3Al powder particles
The effect of heat treatment at 520oC on Si and Mg in 6061/5% volume Ni3Alp composite was investigated. Si atoms diffused through the Al3Ni reaction product to form a Sicontaining Al3Ni2 phase with variable amounts of Si, whereas Mg accumulated at matrixAl3Ni interphases. As a consequence, the 6061 alloy lost its age harden ability.
متن کاملFabrication of TiC particulate reinforced Ni-50Fe super alloy matrix composite powder by mechanical alloying
Mechanical alloying is a powder metallurgy processing technique involving cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. In this work, NiFe-TiC composite powders were prepared by mechanical alloying process using planetary high-energy ball mill. The effect of TiC addition by weight percent on the NiFe solid solution formation, grain size, lattice paramet...
متن کاملTemperature-controlled martensitic phase transformations in a model NiAl alloy
Reversible martensitic phase transformations in a partially disordered Ni–Al alloy within the composition range from 60 to 65 at. % of Ni are investigated using molecular dynamics simulation. During a complete temperature cycle a wide hysteresis in enthalpy, volume, and shape of the simulated crystals is observed. The temperature T0 of the phase transformation is found from the calculated free ...
متن کاملan investigation into the wear behaviour of aluminum (aa2124) matrix composite reinforced with intermetallic mosi2 particles
in the present work, the aa2124/25vol.%mosi2 composite was produced by powder metallurgy technique. the aluminum alloy 2124 powder was produced by gas atomization method and the mosi2 intermetallic particles were produced through combustion synthesis. the aa2124 matrix powder was mechanically blended with 25vol.%mosi2 using a ball milling mixer. the blended powder mixture was encapsulated and t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2007
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2007.07.012