ASSESSMENT OF SHEAR STRENGTH OF POLYOLEFIN AND STEEL FIBRE REINFORCED CONCRETE
نویسندگان
چکیده
منابع مشابه
Punching shear strength of steel fibre reinforced concrete slabs
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...
متن کاملStrength and Permeability Characteristics of Steel Fibre Reinforced Concrete
The results reported in this paper are the part of an extensive laboratory investigation undertaken to study the effects of fibre parameters on the permeability and strength characteristics of steel fibre reinforced concrete (SFRC). The effect of varying fibre content and curing age on the water permeability, compressive and split tensile strengths of SFRC was investigated using straight steel ...
متن کاملStrength Development and Water Permeability of Steel Fibre Reinforced Concrete
Research reported in this paper was carried to study the water permeability of steel fibre reinforced concrete (SFRC) with varied aspect ratios of steel fibres. Corrugated steel fibres were used in the investigation at constant fibre content of 0.5%. Relationship of water permeability with compressive strength and split tensile strengths has been presented. The water permeability was observed t...
متن کاملStrength and Toughness of Reinforced Concrete with Coated Steel Fibers
The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....
متن کاملFlexural Fatigue Strength of Steel Fibre Reinforced Concrete Containing Blends of Limestone Powder and Silica Fume
Based upon the statistical distribution of flexural fatigue life data and flexural fatigue strength of the steel fibre reinforced concrete (SFRC) containing blends of limestone powder (LP) and silica fume (SF), the influence of these inserts on the flexural fatigue performance of concretes is probed. Concrete mixes were proportioned to replace 30% cement with these mineral inserts in different ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DYNA
سال: 2018
ISSN: 1989-1490
DOI: 10.6036/8485