Assessment of Reinforced Concrete Half Joint According to EN-1992-1-1

Obtaining Effective Half-Cell Potential Measurements in Reinforced Concrete Structures

Corrosion of steel reinforcement is a major factor in the deterioration of highway and bridge infrastructure. A survey of the condition of a reinforced concrete structure is the first step towards its rehabilitation. A rapid, cost-effective and non-destructive condition survey offers key information on the evaluation of corrosion, and aids in the quality assurance of concrete repair and rehabil...

Damage Assessment of Reinforced Concrete Buildings Considering Irregularities (RESEARCH NOTE)

Structural damage can be controlled in performance based seismic design (PBSD) according to the requirement under a certain hazard level. During strong ground motion (GM) such buildings suffer minor to major damages depending on the shaking level of GM. The available damage assessment methods are complex, tedious and time-consuming procedure. In the present study, a simplified empirical model h...

Analytical assessment of reinforced concrete frames equipped with TADAS dampers

In recent years, it is considerably attempted to develop the concept of energy dissipation as an applicable technology to overcome the energy released by earthquakes. The passive control systems such as metallic dampers have been widely considered. The dampers are basically used to mitigate the structural responses and reduce the damages in main structural elements by energy dissipation. ...

A particle swarm optimisation approach to reinforced concrete beam design according to AS3600

Airfield Pavements Made of Reinforced Concrete: Dimensioning According to the Theory of Limit States and Eurocode

Abstract—In the previous airfield construction industry, pavements made of reinforced concrete have been used very rarely; however, the necessity to use this type of pavements in an emergency situations justifies the need reference to this issue. The paper concerns the problem of airfield pavement dimensioning made of reinforced concrete and the evaluation of selected dimensioning methods of re...