Assessing the Hardness of Quenched Medium Steel Using an Ultrasonic Nondestructive Method
نویسندگان
چکیده
منابع مشابه
Using the Ultrasonic Nondestructive Methods for Prediction of Mechanical Properties of AISI 4140 Alloy Steel
Achieving the mechanical properties of steels after various manufacturing and heat treatment processes is significant and essential. In production lines, after producing the specific and standard samples, mechanical properties have been measured by destructive processes which cause waste of cost and time. In addition, destructive techniques cannot detect the miniscule changes made in mechanical...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Design of Nondestructive System for Hardness of Carbonitrided Steel Parts Using Eddy Current Testing Method: Case study on the Tappet Parts
In this paper, a non-destructive eddy current test system was designed to evaluate the surface hardness of the carbonitrided steel parts. For this purpose, various samples of the tappet were used after the surface hardening and grinding operations as control samples and, if necessary, were subjected to destructive and non-destructive tests. Microstructural studies were performed with a microsco...
متن کاملAssessing the flexural strength changes in decayed wood of Iranian beech (Fagus orientalis) by using of nondestructive stress wave method
The aim of this study was to evaluate sound and decayed wood of Iranianbeech (Fagus orientalis) with a nondestructive stress wave method. Wood samples,with dimensions of 9 by 19 by 200 mm were decayed in laboratory soil-bed tests,based on European pre-standard ENV-807. The decay was evaluated by measuringbending dynamic modulus of elasticity (MOEd) and longitudinal dynamicmodulus of elasticity ...
متن کاملNondestructive Evaluation of Closed Cracks Using an Ultrasonic Transit Timing Method
In this study, we investigated a method for the non-destructive detection of cracks based on an ultrasonic transit timing method. This method is considered to be an effective means for crack monitoring over an extensive coverage area. Aluminum specimens were prepared with a range of crack sizes and subjected to a tone burst wave to investigate the relationship between crack depth and the transi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2015
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2015/684836