Aqueous cadmium removal by hydroxylapatite and fluoroapatite

Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation

In this study, the removal of cadmium and lead ions from aqueous solution by nanocrystalline magnetite was investigated. The nanocrystalline magnetite was synthesized by mechanochemical activation of hematite in a high energy planetary mill in argon atmosphere for 45 hours. The ability of the synthesized nanocrystalline magnetite for removal of Cd(II) and Pb(II) from aqueous solutions was studi...

Cadmium Removal from Aqueous Solution by Canola Residues: Adsorption Equilibrium and Kinetics

Removal of Pb(II) and Cu(II) Ions from ‎Aqueous Solutions by Cadmium Sulfide ‎Nanoparticles

   In this study, cadmium sulfide nanoparticles (CdS NPs) were prepared, characterized and used as a new adsorbent for simultaneous removal of Pb(II) and Cu(II) ions from aqueous solutions. Using a batch adsorption method, the effects of solution pH, contact time, adsorbent dose, and temperature were studied and optimized. Removal efficiencies, higher than 98% were obtained for both the met...

Removal of Cadmium from Aqueous Solutions by a Synthesized Activated Carbon

Introduction: There are different methods for removal of cadmium from aqueous solutions. Adsorption based methods are among the bests. One of the most important aspects for adsorption techniques is the availability of an accessible and economical adsorbent. This study aims to investigate cadmium removal from aqueous solutions by walnuts shell waste. Materials and Methods: Walnut Shell (WS) was...

REMOVAL OF CADMIUM FROM AQUEOUS SOLUTION USING COBALTSILICATEPRECIPITATIONTUBE (CoSPT) ASADSORBENT

Cobalt silicate precipitation tube (CoSPT), prepared through ‘silica garden’ route was found to be a potential adsorbent for removal of cadmium from aqueous medium. Detail adsorption study of Cd(II) on CoSPT was investigated. Batch adsorption studies were carried out as a function of contact time, adsorbent dose, adsorbate concentration (50-300 mg L-1), temperature (298-323K). Cd(II) loading on...