Approximations for large deflection of a cantilever beam
نویسندگان
چکیده
منابع مشابه
Ludwick Cantilever Beam in Large Deflection Under Vertical Constant Load
The aim of this paper is to calculate the horizontal and vertical displacements of a cantilever beam in large deflections. The proposed structure is composed with Ludwick material exhibiting a different behavior to tensile and compressive actions. The geometry of the cross-section is constant and rectangular, while the external action is a vertical constant load applied at the free end. The pro...
متن کاملLarge Deflection Static Analysis of a Cantilever Beam Subjected to a Point Load
This work presents geometrically non-linear static analysis of a cantilever beam subjected to a non-follower transversal point load at the free end of the beam. The material of the beam is assumed as isotropic and hyperelastic. In this study, finite element model of the beam is constructed by using total Lagrangian finite element model of two dimensional continua for a twelve-node quadratic ele...
متن کاملPhotothermal cantilever deflection spectroscopy
Microcantilever sensors offer high sensitivity in the detection of adsorbed molecules based either on resonance frequency shift or changes in cantilever deflection, as both of these signals can be detected with very high resolution. Despite the high sensitivity offered by this platform, cantilevers suffer from poor selectivity due to the lack of sufficiently selective interfacial layers which c...
متن کاملLarge and small deflections of a cantilever beam
"Large and small deflections of a cantilever beam".Large and small deflections of a cantilever beam". ABSTRACT The classical problem of deflection of a cantilever beam of linear elastic material, under the action of an external vertical concentrated load at the free end, is analyzed. We present the differential equation governing the behaviour of this physical system and show that this equation...
متن کاملA complete analysis of the laser beam deflection systems used in cantilever-based systems.
A working model has been developed which can be used to significantly increase the accuracy of cantilever deflection measurements using optical beam techniques (used in cantilever-based sensors and atomic force microscopes), while simultaneously simplifying their use. By using elementary geometric optics and standard vector analysis it is possible, without any fitted or adjustable parameters, t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Quarterly of Applied Mathematics
سال: 1973
ISSN: 0033-569X,1552-4485
DOI: 10.1090/qam/99716