Applying electron backscattering diffraction to macroscopic residual stress characterisation in a dissimilar weld
نویسندگان
چکیده
منابع مشابه
Residual Stress Characterization in a Dissimilar Metal Weld Nuclear Reactor Piping System Mock Up
Time-of-flight neutron diffraction, contour method, and surface hole drilling residual stress measurements were conducted at Los Alamos National Lab (LANL) on a lab sized plate specimen (P4) from Phase 1 of the joint U.S. Nuclear Regulatory Commission and Electric Power Research Institute Weld Residual Stress (NRC/EPRI WRS) program. The specimen was fabricated from a 304L stainless steel plate ...
متن کاملElectron backscattering diffraction study of coalesced bainite in high strength steel weld metals
Coalesced bainite is a coarse constituent recently found to develop along with the classical martensite, lower and upper bainite in steel weld metals. Its crystallography has been characterised using electron backscattering diffraction in combination with field emission gun scanning electron microscopy. It is confirmed that coalesced bainite grains are crystallographically homogeneous but do co...
متن کاملEffect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers
In a shell and tube heat exchanger, the failure of tube-to-tubesheet welds results in high-pressure water jet which erodes the refractory in front of the tubesheet. Finite element method was employed to simulate the welding process and post weld heat treatment (PWHT) to find the factors affecting the failure in tube-to-tubesheet weldments. Residual stresses in two different geometries of tube-t...
متن کاملI / RESIDUAL STRESS DISTRIBUTION IN FeAl WELD OVERLAY ON STEEL
Neutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were c...
متن کاملControl of Welding Residual Stress for Dissimilar Laser Welded Materials
The most common problem of welding dissimilar metals (DMWs) with respect to residual stresses is the differences in the coefficient of thermal expansion and heat conductivity of the two welded metals. In the present work, a CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and low carbon steel plates. The Taguchi approa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Processing Technology
سال: 2017
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2016.11.003