Application of Wet Etching. Wet Etching-Theory and Application.

Wet and Dry Etching Theory

Wet anisotropic etching of polyimide

With the aim of developing flexible biocompatible implants for in vivo studies of nerve regeneration [1], fabrication of passive polyimide membranes using the commercial available Kapton film (100HN and 50HN, from DuPont) was investigated. Polyimide has been widely used in microelectronics, and its application possibilities have been widening to other fields such as micromachining and biomedica...

Wet-Chemical Etching and Cleaning of Silicon

A Introduction Research and manufacturing related to silicon devices, circuits, and systems often relies on the wet-chemical etching of silicon wafers. The dissolution of silicon using liquid solutions is needed for deep etching and micromachining, shaping, and cleaning. Also, wet-chemistries are often used for defect delineation in single crystal silicon materials. In this paper, a review of t...

Wet Etching of Optical Thin Films

Wet anisotropic etching for fluidic 1D nanochannels

In this paper a method is proposed to fabricate channels for fluidic applications with a depth in the nanometer range. Channels with smooth and straight sidewalls are constructed with the help of micromachining technology by etching shallow trenches into 〈110〉 silicon using native oxide as a mask material and OPD resist developer as the etchant. Sub-50 nm deep fluidic channels are formed after ...