Application of Taguchi – PCA/GRA Method to Optimize the Wear Behaviour of Polyester/Carbon Fibre Composites
نویسندگان
چکیده
منابع مشابه
Experimental Study on Wear Behaviour of Sic Filled Hybrid Composites Using Taguchi Method
The popularity of composite materials usage is increasing due to its superior strength characters racing the traditional materials in strength to weight ratio. The developments of new materials are on the anvil and are growing day by day. In this work, two-body abrasive wear test with different loads and abrading distances were performed at room temperature by using a pin on a disk apparatus to...
متن کاملUsing Taguchi Method to Optimize Recovery of Bismuth by Electrolysis
This paper presents a methodology, based on the taguchi parameter design approach, for the optimization of process parameters for bismuth recovery from aqueous solutions. The process parameters considered are [Bi3+], [NaCl], temperature, and cathodic current density. In addition, cell voltage and current efficiency as two responses have been considered. An orthogonal array L9, the signal-to-noi...
متن کاملInvestigation in to Wear behavior of coir Fiber Reinforced Epoxy Composites with the Taguchi Method
In present investigation the wear behavior of treated and untreated coir dust filled epoxy resin matrix composites were studied. The effect of treated and un treated coir dust concentration (10%, 20% and 30%), varying loads (10, 20 and 30N) and varying velocities (300, 400 and 500) on the abrasive wear rate of composite has been analyzed. The abrasive wear property of the composite is examined ...
متن کاملApplication of Taguchi Technique to Optimize Tribological Behaviour of Al6061T6/SiC/Al2O3 Metal Matrix Composite
Tribological behaviour of aluminium alloy Al6061T6 reinforced with silicon carbide and alumina oxide particles (10%weight percentage of SiC and Al2O3 particles) fabricated by stir casting process was investigated. The wear and frictional properties of the metal matrix composites was studied by performing dry sliding wear test using a computerized pin-on-disc wear tester. Experiments were conduc...
متن کاملusing taguchi method to optimize recovery of bismuth by electrolysis
this paper presents a methodology, based on the taguchi parameter design approach, for the optimization of process parameters for bismuth recovery from aqueous solutions. the process parameters considered are [bi3+], [nacl], temperature, and cathodic current density. in addition, cell voltage and current efficiency as two responses have been considered. an orthogonal array l9, the signal-to-noi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Revue des composites et des mate?riaux avance?s
سال: 2023
ISSN: ['1169-7954', '1958-5799']
DOI: https://doi.org/10.18280/rcma.330201