Application of Taguchi method on Wire Electrical Discharge Machining of Inconel 625

Optimization of Process Parameters in Wire Electrical Discharge Machining of Inconel X-750 for Dimensional Deviation Using Taguchi Technique

Optimization of Process Parameters of Wire Electrical Discharge Machining Using Fuzzy logic Integrated with Taguchi Method

In this paper, fuzzy logic integrated with the Taguchi method is used to optimize Wire Electro Discharge Machining (WEDM) process with multiple quality characteristics. Rough machining with EDM gives poor surface finish and has micro cracks and pores. Finish machining gives better surface finish but with very poor machining speed (MRR). Spark gap width is one of the important performance measur...

Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method

Wire electrical discharge machining (WEDM) is extensively used in machining of conductive materials when precision is of prime importance. Rough cutting operation in WEDM is treated as a challenging one because improvement of more than one machining performance measures viz. metal removal rate (MRR), surface finish (SF) and cutting width (kerf) are sought to obtain a precision work. Using Taguc...

Response of Wire Electrical Discharge Machining For H13 Using Taguchi L9 Array

This paper presents, the experimental study has been made to optimize the process parameters during machining of H-13 by wire electrical discharge machining (WEDM) using Taguchi L9 orthogonal array method. Following input process parameters of WEDM [Pulse-On time (TON), Pulse-Off time (TOFF) and Wire Speed rate (WS) and Wire Tension (WT)] were chosen as variables to study the process output in ...

Parametric Optimization for Surface Roughness in Wire Electrical Discharge Machining— A Taguchi Approach

High carbon high chromium alloy tool steels (D-3) with excellent abrasion resistance (HRC: 58-65) are increasingly used in manufacturing high performance cutting tools (dies and punches), blanking and punching tools, extrusion tools, etc. Being a hard material, it is difficult to machine using conventional machining methods. Wire Electric Discharge Machine(WEDM) seems to be a viable option to m...