Application of Taguchi, Fuzzy-Grey Relational Analysis for Process Parameters Optimization of WEDM on Inconel-825
نویسندگان
چکیده
منابع مشابه
Multi-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملOptimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...
متن کاملParametric Optimization of Wedm Using Grey Relational Analysis with Taguchi Method
Wire EDM is one of the latest advanced micro-machining techniques, where a thin wire (Ǿ= 0.25 mm) of tool electrode is fed on the work piece which gradually shears off the material during the machining process. This micro-machining process may help overcome the limitations and restriction faced during conventional mechanical machining process. This paper is based on wire-EDM machining of a part...
متن کاملOptimization of process parameters by Taguchi based Grey Relational Analysis: A Review
The aim of this paper to review the Taguchi based Grey relational analysis is used to find the best process parameters and improved quality results. The GRA was proposed to optimize the multi response problem by making use of the grey relational coefficient and grey relational grade. GRA is attempted to integrate multiple responses, it is feasible to combine GRA with Taguchi method to provide a...
متن کاملOptimization of Process Parameters in Turning of AISI 8620 Steel Using Taguchi and Grey Taguchi Analysis
The aim of this research is to investigate the optimization of cutting parameters (cutting speed, feed rate and depth of cut) for surface roughness and metal removal rate in turning of AISI 8620 steel using coated carbide insert. Experiments have been carried out based on Taguchi L9 standard orthogonal array design with three process parameters namely cutting speed, feed rate and depth of cut f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Journal of Science and Technology
سال: 2015
ISSN: 0974-5645,0974-6846
DOI: 10.17485/ijst/2015/v8i35/50946