Application of Sol-Gel Method. Overview of Sol-Gel Method and Its Application.
نویسندگان
چکیده
منابع مشابه
Thermoluminescece properties of BeO:Mg nanoparticles produced by sol-gel method
Beryllium oxide (BeO) nanopowder was synthesized using sol-gel method and the effects of changes of chemical reagents were investigated. Because of tissue equivalence and other outstanding thermoluminescence (TL) properties of the bulk material in X and γ dosimetry, the applicability of this nanostructure in TL dosimetry was studied following irradiation to the 137 C...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملSYNTHESIS OF SrTiO3 NANOPOWDER BY SOL-GEL- HYDROTHEMAL METHOD FOR GAS SENSING APPLICATION
Strontium titanate (SrTiO3) nanopowder has been synthesized through a sol-gelhydrothermal method. The X-ray diffraction studies of SrTiO3 nanopowder have shown that the asprepared powder was single phase, crystalline, and has a cubic perovskite structure (ABO3) with a lattice constant a = 3.903 Å. The particle size calculated from FWHM was ∼22 nm. SrTiO3 nanopowder was examined using thermo gra...
متن کاملPreparation of Silica by Sol-Gel Method Using Formamide
In this work we obtained microporous and mesoporous silica gels by sol-gel processing. Tetraethylortosilicate (TEOS) was used as precursor. Nitric acid and hydrofluoric acid were used as catalysts. In order to study the affect of formamide as drying additive, we used a molar ratio alkoxide/formamide of 1/1. The performance of formamide in obtaining crack-free gels was evaluated through monolith...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1999
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.50.161