Application of Simple Numerical Simulation of Welding Distortion Using Thermal Shrinkage Technique to Multi-layer Welded Joint

نویسندگان

چکیده

The thermal shrinkage technique with previously proposed input parameter values for single-pass welding was applied to a multi-layer butt-welded joint four layers and six passes validate whether these parameters are applicable welded joints. out-of-plate displacement distributions of the obtained using were in good agreement those elastic-plastic analysis an experiment. angular distortion transverse at center line well agreed experimental results each pass. Furthermore, calculation time 1/6 that analysis. Our demonstrate could be

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation-based numerical optimization of arc welding process for reduced distortion in welded structures

This paper presents an effective numerical approach for welding process parameter optimization to minimize weld-induced distortion in structures. A numerical optimization framework based on coupled Genetic Algorithm (GA) and Finite Element Analysis (FEA) is developed and implemented for a low and a high fidelity model. Classical weakly coupled thermo-mechanical analysis with thermo-elasto-plast...

متن کامل

investigation of thermal comfort properties of woven sport fabric using blend of estabragh fibers

امروزه لباس در نظر ورزشکاران و کسانی که برای اوقات فراغت خود و یا برای رسیدن به اندامی متعادل، ورزش می کنند؛ بسیار با اهمیت است. احساس مطلوب از لباس در زمره خصوصیات راحتی پوشش می باشد. خصوصیات انتقال رطوبت لباس، در ارزیابی راحتی حسی و حرارتی منسوجات تولید شده از آن ها بسیار مهم است. هدف از این تحقیق، معرفی پارچه جدید است که متشکل از الیاف استبرق با خواص منحصر به فرد می باشد. استبرق لیف طبیعی تو...

Finite Element Simulation of Welding Distortion in Large Structure

Fusion welding is widely used in heavy industries to join different parts together. But sometimes welding-induced distortions cause problems like misalignment during assembling and make costs to remove them. Thus it is imperative to predict and mitigate them to improve weldments quality and also reduce in fabrication costs. This study at first will introduce inherent deformation method for pred...

متن کامل

Finite Element Simulation of Welding Distortion in Large Structure

Fusion welding is widely used in heavy industries to join different parts together. But sometimes welding-induced distortions cause problems like misalignment during assembling and make costs to remove them. Thus it is imperative to predict and mitigate them to improve weldments quality and also reduce in fabrication costs. This study at first will introduce inherent deformation method for pred...

متن کامل

Numerical simulation of laser beam welding of Ti6Al4V sheet

This paper was aimed to report the 3D finite element analysis simulation of laser welding process of Ti6Al4V 1.7 mm sheets in butt joint in order to predict the temperature distribution, hardness, and weld geometry. The butt-joint welds were made using CO2 laser with the maximum power of 2.2 kW in the continuous wave mode. A part of the experimental work was carried out to verify the weld geome...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Quarterly Journal of The Japan Welding Society

سال: 2023

ISSN: ['0288-4771', '2434-8252']

DOI: https://doi.org/10.2207/qjjws.41.11s