APPLICATION OF PROCAST PROGRAM FOR SIMULATION OF TNM-B1 TITANIUM ALUMINIDE BASED ALLOY CASTING PRODUCTION PROCESS SIMULATION BY CERAMIC MOLD CASTING
نویسندگان
چکیده
منابع مشابه
Thermal Simulation of Solidification Process in Continuous Casting
In this study, a mathematical model is introduced to simulate the coupled heat transfer equation and Stefan condition occurring in moving boundary problems such as the solidification process in the continuous casting machines. In the continuous casting process, there exists a two-phase Stefan problem with moving boundary. The control-volume finite difference approach together with the boundary ...
متن کاملSimulation of the Stir Casting Process
Non homogeneous particle distribution is one of the greatest problems in casting Metal Matrix Composites (MMC's). To optimize some of the parameters for uniform particle distribution for batch compocasting the present simulation studies were conducted. The simulation involves visualisation experiments. In the visualisation experiments liquid and semi solid aluminium are replaced by other fluids...
متن کاملNumerical Simulation of the Investment Casting Process
Determining alloy shrinkage factors is very important for the investment casting process. Casting dimensions can be obtained from numerical simulations of heat transfer and deformation phenomena. The accuracy of the dimensional results depends on heat transfer results. In order to validate heat transfer models, temperature data were obtained during casting of aluminum alloy A356 in shell molds ...
متن کاملEffect of investment type and mold temperature on casting accuracy and titanium-ceramic bond.
This study evaluated the casting accuracy of crown margins and metal-ceramic shear bond strength (SBS) of pure titanium injected into casting molds made using 2 investment types at 3 mold temperatures. Sixty crown (30-degree beveled finish line) and 60 cylinder (5mm diameter × 8mm high) patterns were divided into 6 groups (n=10), and cast using a phosphate-bonded investment (P) and a magnesium ...
متن کاملThe Effect of Dewaxing and Burnout Temperature in Block Mold Process for Copper Alloy Casting
The main objective of this research is to investigate the effect of dewaxing and burnout temperature on the quality of copper alloy casting produced by a low cost block mold that has been developed. In the molding process, two types of silica sand which contains 97.9% silica (SiO2) and 97.2% silica have been used as a refractory material with POP served as a binder. Several mold formulations co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya Vuzov. Tsvetnaya Metallurgiya (Proceedings of Higher Schools. Nonferrous Metallurgy)
سال: 2015
ISSN: 2412-8783,0021-3438
DOI: 10.17073/0021-3438-2013-6-9-13