Application of industrial robot in 5-axis milling process
نویسندگان
چکیده
منابع مشابه
Optimization of 5-Axis Milling Processes Using Process Models
Productivity and part quality are extremely important for all machining operations, but particularly for 5-axis milling where the machine tool cost is relatively higher, and most parts have complex geometries and high quality requirements with tight tolerances. 5axis milling, presents additional challenges in modeling due to more complex tool and workpiece interface geometry, and process mechan...
متن کاملOptimization of 5-Axis Milling Processes Based on the Process Models with Application to Airfoil Machining
L.T. Tunc , E. Budak * Sabanci University, Faculty of Engineering and Natural Sciences, Istanbul-Turkiye * [email protected] Abstract 5-axis milling is widely used in machining of complex surfaces such as airfoils. Improper selection of machining parameters may cause low productivity and undesired results during machining. There are several constraints such as available power and torque, c...
متن کامل5-Axis Flank Milling of Sculptured Surfaces
This chapter covers the various free-form surface flank milling strategies available, focusing in particular on those for ruled surfaces as widely used in defining turbomachine parts. All these positionings seek to reduce interference between the cutting tool and the surface to be milled so as to respect the tolerances dictated by the Design Office. The range of strategies presented goes from t...
متن کامل5-axis High Speed Milling Optimisation
Manufacturing of free form parts relies on the calculation of a tool path based on a CAD model, on a machining strategy and on a given numerically controlled machine tool. In order to reach the best possible performances, it is necessary to take into account a maximum of constraints during tool path calculation. For this purpose, we have developed a surface representation of the tool paths to m...
متن کاملCharacterization of 3D surface topography in 5-axis milling
Within the context of 5-axis free-form machining, CAM software offers various ways of toolpath generation, depending on the geometry of the surface to be machined. Therefore, as the manufactured surface quality results from the choice of the machining strategy and machining parameters, the prediction of surface roughness in function of the machining conditions is an important issue in 5-axis ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2019
ISSN: 2261-236X
DOI: 10.1051/matecconf/201929904004