Application of Co–Ni–P Coating on Grain-Oriented Electrical Steel
نویسندگان
چکیده
منابع مشابه
Application of Co-Ni-P coating on grain-oriented electrical steel
An electroless plating of Co-Ni-P was applied to a grain-oriented electrical steel substrate resulting in a power loss improvement of approximately 9-11 %. The mean thickness of the coating was found to be 2.15±0.15 μm from Environmental Scanning Electron Microscope (ESEM) images. Shifts of the magnetostriction stress sensitivity curves showed that stress was acting on the substrate corroborate...
متن کاملElectroless Co–P-Carbon Nanotube composite coating to enhance magnetic properties of grain-oriented electrical steel
The effect of Co–P-CNT coating on the magnetic properties of grain oriented electrical steel was investigated. To analyse the coating, Raman spectroscopy, Superconducting QUantum Interference Device (SQUID), single strip testing, Scanning Electron Microscopy (SEM) and talysurf surface profilometry were performed. Raman spectra showed the D and G band which corroborates the presence of Multi-Wal...
متن کاملSecondary recrystallization characteristics of 3%Si grain-oriented electrical steel
A secondary recrystallization Lab study focusing on the secondary recrystallization temperature and magnetic properties was carried out on cold rolling industrial samples of 3%Si grain-oriented electrical steel produced by low slab reheating temperature technology. The results showed a secondary recrystallization temperature, determined by the observed grain size change, of 1080 C with annealin...
متن کاملMechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel
Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with <001>, which is ...
متن کاملAnalysis of Microstructure and Microtexture in Grain-oriented Electrical Steel (goes) during Manufacturing Process
A. Volodarskaja, V. Vodárek, J. Holešinský, VŠB Technical University of Ostrava, FMME, Ostrava, Czech Republic. Š. Miklušová, O. Žáček. ArcelorMittal Frýdek-Místek, Frýdek-Místek, Czech Republic The final Goss texture in grain-oriented electrical steels (GOES) is affected by microstructure evolution and inheritance during the whole production process. This paper presents the results of detailed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Magnetics
سال: 2016
ISSN: 0018-9464,1941-0069
DOI: 10.1109/tmag.2015.2496315