Application of Active Base Isolation System Using Absolute Vibration Control Technology
نویسندگان
چکیده
منابع مشابه
Application of Active Base Isolation Control
The structural control can provide the potential protection through passive and active control techniques. Structures with base isolations have been successfully implemented and proven effective in the vibration mitigation. To enhance the functionality of base isolations, a hybrid control system can be considered using a combination with active control devices. This research applies the hybrid ...
متن کاملMULTI-OBJECTIVE SEMI-ACTIVE BASE ISOLATION SYSTEM
Semi-active base isolation system has been proposed mainly to mitigate the base drift of isolated structures while in most cases, its application causes the maximum acceleration of superstructure to be increased. In this paper, designing optimal semi-active base isolation system composed of linear base isolation system with low damping and magneto-rheological (MR) damper has been studied for co...
متن کاملmulti-objective semi-active base isolation system
semi-active base isolation system has been proposed mainly to mitigate the base drift of isolated structures while in most cases, its application causes the maximum acceleration of superstructure to be increased. in this paper, designing optimal semi-active base isolation system composed of linear base isolation system with low damping and magneto-rheological (mr) damper has been studied for co...
متن کاملDecentralized control for multichannel active vibration isolation
This paper describes a theoretical and experimental investigation into an active four-mount vibration isolation system, in which electromagnetic actuators are installed in parallel with each of the four passive mounts placed between a three-dimensional piece of equipment and a vibrating base structure. Decentralized velocity feedback control is applied, where each actuator is operated independe...
متن کاملVibration control of an automotive engine using active mounts
In this research, vibration control of national engine (EF7) using active mounts is studied for two different mounting layouts. The first layout is based on the current engine mounting of national engine (system of three passive mounts), but the hydraulic mount is substituted by an active mount. The other mounting layout contains 4 mounts, 2 of which are active ones and the others are passive m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2012
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.78.1632