Applicability of a modified backward extrusion process on commercially pure aluminum
نویسندگان
چکیده
منابع مشابه
Investigation on the Deformation Behavior and Strain Distribution of Commercially Pure Aluminum after Circular Simple Shear Extrusion
Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...
متن کاملAn Analysis on the Forming Characteristics of commercial pure Aluminum AA 1100 in Radial-Forward Extrusion Process
Abstract: In this paper, the forming process of a central hub by radial-forward extrusion is analyzed by using the finite element software, ABAQUS. Radial-forward extrusion is used to produce hollow parts that generally feature a central hub with radial protrusions. Effective design factors such as mandrel diameter, die corner radius, die fillet radius, mandrel corner radius, tube wall thick...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design (1980-2015)
سال: 2015
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2014.09.043