منابع مشابه
Design of Silicon Nano-Bars Anti-Reflection Coating to Enhance Thin Film Solar Cells Efficiency
In this paper a novel anti-reflection (AR) coating based on silicon nano-bars is designed and its impact on the performance of crystalline silicon (c-Si) thin-film solar cells is extensively studied. Silicon nano-bars with optimized size and period are embedded on top of the active layer, under a 100nm Si3N4 layer. As a result of the proposed layer stack, an inhomogeneous intermediate layer wit...
متن کاملHot-wire chemical vapor deposition of high hydrogen content silicon nitride for solar cell passivation and anti-reflection coating applications
The stoichiometry and hydrogen content of hot-wire (HW)-grown silicon nitride was examined as a function of SiH yNH 4 3 flow ratio. The effect of post-deposition hydrogenation treatment on overall film hydrogen content was determined. The hydrogen release properties in Si-rich and N-rich nitride layers were characterized by annealing treatments. Defect hydrogenation was studied using Fourier tr...
متن کاملAn Anti-Reflection Coating for Silicon Optics at Terahertz Frequencies
A method for reducing the reflections from silicon optics at terahertz frequencies has been investigated. In this study, we used thin films of parylene as an anti-reflection (AR) layer for silicon optics and show low-loss behavior well above 1 THz. Transmittance spectra are acquired on double-sided-parylene-coated, high-resistivity, single-crystal silicon etalons between 0.45 THz and 2.8 THz. M...
متن کاملAnti-Reflection Coating for Nitrogen-Vacancy Optical Measurements in Diamond
We realize anti-reflection (AR) coatings for optical excitation and fluorescence measurements of nitrogen-vacancy (NV) color centers in bulk diamond by depositing quarter-wavelength thick silica layers on the diamond surface. These AR coatings improve NV-diamond optical measurements by reducing optical reflection at the diamond-air interface from 17% to 2%, which allows more effective NV optica...
متن کاملPolymer solar cell by blade coating
Polymer bulk hetero-junction solar cells of poly(3-hexylthiophene) (P3HT) donor and (6,6)-phenyl-C61-butyric acid methyl ester (PCBM) acceptor are fabricated by blade coating in toluene solution. Desired donor–acceptor self-organization is achieved without the slow drying process and high boiling point solvent. Power conversion efficiency is 3.8%, much higher than the 2.6% obtained by spin coat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress in Electromagnetics Research C
سال: 2023
ISSN: ['1937-8718']
DOI: https://doi.org/10.2528/pierc22121605