ANSYS Workbench: Concrete Pavement Model

ANSYS Workbench User's Guide

Component Mode Synthesis in ANSYS Workbench Simulation

At ANSYS Workbench 11.0, the ANSYS Rigid Dynamics add-on module enables users to define joint connections in complex kinematic assemblies. This ability to model rigid and flexible parts in ANSYS Workbench Simulation via joints is beneficial since the rigid parts are modeled with mass and rigid links (that is, rigid contact elements), thus providing load transfer capabilities and allowing users ...

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...

Measuring and Analyzing Pavement Texture Concrete Pavement Surface Characteristics Program

Introduction Pavement texture is defined by the irregularities on a pavement surface that deviate from an ideal, perfectly flat surface. As shown in Figure 1, the World Road Association (PIARC) has established standard categories of texture, classified by wavelength. These categories include microtexture (wavelengths up to 0.5 mm), macrotexture (0.5 to 50 mm), megatexture (50 to 500 mm), and ro...

Model order reduction of large scale ODE systems : MOR for ANSYS versus ROM workbench

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version ...