Ansys Analysis and Study of Mechanical Properties for Aluminum Based LM25 Metal Matrix Composite Fabricated with Conventional Method
نویسندگان
چکیده
Metal matrix composites with aluminum as base metal are extensively used in the important engineering industries, their properties can be improved for many requirements. In current work it is tried to make process cost effective. The efforts made less expensive properties. this a attempt fabricate Aluminum LM25 based Matrix Composite aim of developing low conventional method manufacturing Composites. different combinations LM25-Fe3O4 and mechanical tested studied on alloy wheel Ansys software. Experiments done various Fe3O4 reinforce material (2.5%, 5% 7.5% by weight) then examined present also shows analysis car all new predict effect loading. change combination shown an automobile
منابع مشابه
EFFECTS OF ELEVATED TEMPERATURE ON MECHANICAL BEHAVIOR OF AN ALUMINUM METAL MATRIX COMPOSITE
Effects of temperature on properties and behavior of a 20 vol % particulate SiC reinforced 6061 aluminum alloy and 6061 unreinforced Al alloy were investigated. Yield strength and elongation to failure were measured as a function of test temperatures up to 180^oC. In addition, the effects of holding time at 180^ oC on tensile properties and fracture mechanisms of the materials at this temperatu...
متن کاملThe Structural and Mechanical Properties of Al-2.5%wt. B4C Met-al Matrix Nano-composite Fabricated by the Mechanical Alloying
In this study, aluminum (Al) matrix reinforced with micro-particles (30 µm) and nano-particles (50 nm) boron carbide (B4C) were used to prepare Al-2.5%wt., B4C nano-composite and micro-composite, respectively, using mechanical alloying method. The mixed powders were mechanically milled at 5, 10, 15 and 20 hrs. The XRD results indicated that the crystallite sizes of both the micro-composite and ...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولSynthesis of Aluminum- CNTs Composites Using Double-Pressing Double-Sintering Method (DPDS)
Metal matrix composite (MMC) is engineered combination of the metal (matrix) and hard particle (reinforcement) to get tailored properties. MMCs are either in use or prototyping for the space shuttle, commercial airliners, electronic substrates, automobiles, golf clubs, and a variety of other applications.In this study, carbon nanotubes (CNTs) reinforced aluminum MMCs were synthesized by DPDS fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in transdisciplinary engineering
سال: 2022
ISSN: ['2352-751X', '2352-7528']
DOI: https://doi.org/10.3233/atde220769