Anomalous Flow Phenomena Due to Breakdown of Tip Leakage Vortex in an Axial Compressor Rotor at Near-Stall Condition.
نویسندگان
چکیده
منابع مشابه
Investigation of Tip-leakage-vortex Breakdown and Its Role in Rotating Stall in a 1.5-stage Low-speed Axial-compressor
April 10-15, 2016 Abstract A whole-annulus unsteady numerical simulation is carried out to investigate the mechanism of the rotating stall in a 1.5-stage low-speed axial-compressor. By comparing the experimental and numerical results, the numerical results are validated. The numerical simulation captures the most features of the rotating stall of the 1.5-stage compressor observed from the exper...
متن کاملEffects of Different Turbulence Models in Simulation of Unsteady Tip Leakage Flow in Axial Compressor Rotor Blades Row
Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...
متن کاملNumerical Simulation of Dynamic Stall Phenomena in Axial Flow Compressor Blade Rows
This article explores the simulation of stall phenomena in axial compressor blade rows. The approach is based on the numerical solution of the compressible, two-dimensional Navier-Stokes equations. The results of both unforced and forced low-speed rotor stall are presented. In unforced cases, substantial ow separation is observed before the maximum pressure rise operating point is reached. Thes...
متن کاملAspects of Two-Phase Flow Screw Compressor Modelling Part I: Leakage Flow and Rotor Tip Friction
A one-dimensional leakage flow model for two-phase ammonia-water twin screw compressors is presented. The model takes into account viscous and acceleration forces and is based on three conservation equations and on the equation of state for homogenous NHiH20 mixture. The governing equations are solved with a finite difference method. Numerical shooting is used to find such inlet flow velocity a...
متن کاملNumerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor
The effect of the tip gap size on the performance of a multistage axial compressor was studied by means of computational fluid dynamics (CFD). It was found that the performance of the compressor was very sensitive to the size of the tip gap. By increasing the gap size, the stall margin value, the total pressure ratio and the compressor efficiency reduced considerably. The flow field at the tip ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2000
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.66.1029