Anodizing of aluminum in amine alkaline baths containing fluoride.
نویسندگان
چکیده
منابع مشابه
Fast Anodizing of Aluminum Piston Heads
Hard anodizing of aluminum piston heads for internal combustion engines Is usually performed by immersion, with a time ranging from 40 to 50 minutes. This paper wii i present a new process, based on specially adapted hydrodynamics of the electrolyte, applying electrolysis parameter values outside the usual range and which greatly reduce the treatment time. In addition to applications to other c...
متن کاملPhysical Properties of Nanostructured CdO Films from Alkaline Baths Containing Saccharin as Additive
Nanostructured cadmium oxide (CdO) films were fabricated on glass substrates from alkaline baths containing saccharin as an additive by a successive ionic layer adsorption and reaction (SILAR) method. The effects of saccharin concentration in the bath on the structural, morphological, and optical properties were studied by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), ph...
متن کاملImproved Technology for Hard Anodizing Dissolution of Aluminum Alloy Part
This paper deeply analyzes the main factors of the dissolved problems arising in the process of aluminum alloy hard anodizing, combined with the specific problems occurring in production practice, introduces in detail the method and thought to analyze and investigate the causes of dissolving, and puts forward targeted improvement technology. This paper is practically instructive and significant...
متن کاملAmine Fluoride and Biofilms
The amine fluoride (AmF) N -octadecyltrimethylendiamineN,N,N -tris(2-ethanol)-dihydrofluoride is a cationic antimicrobial which can have beneficial effects on plaque formation. Here, we determine changes in pellicle and bacterial cell surface properties of the strains Actinomyces naeslundii HM1, Streptococcus mutans NS, S. mutans ATCC 700610, S. sobrinus HG1025 and S. oralis HM1 upon adsorption...
متن کاملAnodizing of Magnesium Alloy Az31 by Alkaline Solution
-Anodizing of AZ 31 Mg alloy was investigate in 3M KOH solution for 10, 20 and 30min. at constant voltage of 5V. Atomic force microscope (AFM) used to investigate the roughness of anodic film formed on the surface while the scanning electron microscope (SEM) was used to determine the morphology of the anodic film, it was found that the roughness of the anodic film is mainly depend on the anodiz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1990
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.41.417