Anodic Dissolution Characteristics of Al-Ga Alloys in NaCl Containing Dilute NaOH Solution
نویسندگان
چکیده
منابع مشابه
The Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative
This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...
متن کاملPrecipitation hardening in dilute Al–Zr alloys
The aim of this study was to investigate the effect of solute content (hipoperitectic Al–0.22 wt.%Zr and hiperperitectic Al–0.32 wt.%Zr) on the precipitation hardening and microstructural evolution of dilute Al–Zr alloys isothermally aged. The materials were conventionally cast in a muffle furnace, solidified in a water-cooled Cu mold and subsequently heat-treated at the temperature of 650 K (3...
متن کاملOn the electrochemical dealloying of Al-based alloys in a NaCl aqueous solution.
The electrochemical dealloying of rapidly solidified Al-based alloys in a 1 M NaCl aqueous solution has been investigated using electrochemical measurements in combination with microstructural analysis. The results show that nanoporous metals (Au, Ag, Pd and Cu) with various morphologies can be fabricated through electrochemical dealloying of the Al-based alloys in the NaCl solution. The electr...
متن کاملLiquid phase-enabled reaction of Al-Ga and Al-Ga-In-Sn alloys with water
The water-reactivity of AleGa and AleGaeIneSn alloys is investigated as a means to utilize the chemical potential energy of Al to split water for the production of H2. Al in bulk quantities of these alloys participates in a heterogeneous reaction with water to produce H2 and a-Al(OH)3 (bayerite). Low melting point phases in these alloys are believed to enable the observed reaction upon liquefac...
متن کاملCO2 Measurement of Synthetic Biogas by Passing It through Dilute NaOH Solution
The feasibility of measuring CO2 content in biogas was evaluated in this research. Firstly, Curtipot pH simulator was used to visualize the titration behaviors of various percentages of dissolved CO2 in a wide range of concentrations of NaOH solution. As a general output of those simulations, it was shown that when the titration curves of different CO2 conte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1994
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.58.8_913