Anodic Bonding of Glass-to-Glass through Magnetron Spattered Nanometric Silicon Layer
نویسندگان
چکیده
منابع مشابه
Study on the Glass Silicon Anodic Direct Bonding Parameters
By MEMS packaging test platform for bonding process of bonding temperature and bonding time, and test silicon specifications experimental study. Experimental results indicate that when the bonding voltage of 1200V, bonding temperature of 445 0 C to 455 0 C, bonding time is 60s, the void fraction is less than 5%. Glass and silicon wafer bonding quality can achieve the best. The experimental resu...
متن کاملFabrication and characterization of 20 nm planar nanofluidic channels by glass-glass and glass-silicon bonding.
We have characterized glass-glass and glass-Si bonding processes for the fabrication of wide, shallow nanofluidic channels with depths down to the nanometer scale. Nanochannels on glass or Si substrate are formed by reactive ion etching or a wet etching process, and are sealed with another flat substrate either by glass-glass fusion bonding (550 degrees C) or an anodic bonding process. We demon...
متن کاملExamination of Glass-Silicon and Glass-Glass Bonding Techniques for Microfluidic Systems
We report here on the results of experiments concerning particular bonding processes potentially useful for ultimate miniaturization of microfluidic systems. Direct anodic bonding of continuous thin Pyrex glass of 250 pm thickness to silicon substrates gives multiple, large voids in the glass. Etchback of thick glass of 1200 pm thickness bonded to silicon substrates gives thin continuous glass ...
متن کاملA Microsystem Based on Porous Silicon-Glass Anodic Bonding for Gas and Liquid Optical Sensing
We have recently presented an integrated silicon-glass opto-chemical sensor for lab-on-chip applications, based on porous silicon and anodic bonding technologies. In this work, we have optically characterized the sensor response on exposure to vapors of several organic compounds by means of reflectivity measurements. The interaction between the porous silicon, which acts as transducer layer, an...
متن کاملA Hermetic Glass–Silicon Package Formed Using Localized Aluminum/Silicon–Glass Bonding
A hermetic package based on localized aluminum/silicon-to-glass bonding has been successfully demonstrated. Less than 0.2 MPa contact pressure with 46 mA current input for two parallel 3.5m-wide polysilicon on-chip microheaters can raise the temperature of the bonding region to 700 C bonding temperature and achieve a strong and reliable bond in 7.5 min. The formation of aluminum oxide with sili...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.12.403