Anode Supported Interconnect for Electrolyte Membrane SOFC
نویسندگان
چکیده
منابع مشابه
Simulation of SOFC stack and repeat elements including interconnect degradation and anode reoxidation risk
Reliability of SOFC stacks is a complex and key issue. This paper presents a simulation study including some degradation processes, namely nterconnect degradation and the anode reoxidation potential. Quantification for these phenomena has been included in a repeat element model to imulate stack degradation and study the influence of design and operating parameters on the degradation. Interconne...
متن کاملInfluence of Electrode Design and Contacting Layers on Performance of Electrolyte Supported SOFC/SOEC Single Cells
The solid oxide cell is a basis for highly efficient and reversible electrochemical energy conversion. A single cell based on a planar electrolyte substrate as support (ESC) is often utilized for SOFC/SOEC stack manufacturing and fulfills necessary requirements for application in small, medium and large scale fuel cell and electrolysis systems. Thickness of the electrolyte substrate, and its io...
متن کاملAnode-Supported Solid Oxide Fuel Cells with Thin Film Electrolyte for Operation at Reduced Temperatures
In order to reduce the operating temperature of solid oxide fuel cells (SOFCs), anodesupported cells incorporating thin film (~10 μm) electrolytes in conjunction with anode/electrolyte and cathode/electrolyte interlayers were studied. Anode supported button cells were prepared through a conventional approach and were analyzed via Scanning Electron Microscopy (SEM), Polarization, and Electrochem...
متن کاملFabrication and Characterizations of YSZ Electrolyte Films for SOFC
Yttria stabilized zirconia (YSZ) has been widely used as electrolyte in solid oxide fuel cell (SOFC). The effect of fabrication process on the properties of YSZ electrolyte thick film is discussed in the paper. With YSZ nano-powders of about 20-60nm as raw material, YSZ green adobe was fabricated by tape calendering process. Three-step sintering process was performed firstly holding at 1000°C f...
متن کاملTantalum carbide as a novel support material for anode electrocatalysts in polymer electrolyte membrane water electrolysers
Iridium oxide (IrO2) currently represents a state of the art electrocatalyst for anodic oxygen evolution. Since iridium is both expensive and scarce, the future practical application of this process makes it essential to reduce IrO2 loading on the anodes of PEM water electrolysers. In the present study an approach to utilising a suitable electrocatalyst support was followed. Of the materials se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 2003
ISSN: 0161-6374,2576-1579
DOI: 10.1149/200307.0832pv