Anode Furnace Refining and Electrolysis of Copper
نویسندگان
چکیده
منابع مشابه
Anode Slime Gained During Electrolysis Process of Secondary Copper Anodes
The aim of this research is to get a better understanding of the electrolytic refining process in order to yield the anode slime. Three types of secondary copper anodes are electro refined in an electrolytic system, where the electrolyte is an acid of copper sulphate solution. As a result of the electro-refining process the anode slime has been gained as secondary product. The experimental ...
متن کاملcharacterization of copper anode slimes from bicc
anode slimes are a by-product of the electrolytic copper refining process, which contain the precious and other important metals .in order to find a suitable method for treating these materials it is necessary to know their phase composition. for the separation of various phases from the complexmixture of copper anode. slime, the slime is leached in various steps and the residues of each step a...
متن کاملApplication of Genetic Neural Network for Diagnosis of Anode Anomaly and Metal Wave in Aluminum Electrolysis
This paper presents a neural network model based on the cell resistance signal. In the model, the anode current spectral energy is set as the input vector; the normal production, anode anomaly and metal wave are set as the output sample. By using genetic algorithm to optimize the initial weights and thresholds of the network, the model realized the diagnosis of the anode anomaly and metal wave ...
متن کاملPreparation and Conductivity Measurements of LSM/YSZ Composite Solid Oxide Electrolysis Cell Anode Materials
One of the most promising anode materials for solid oxide electrolysis cell (SOEC) application is the Sr-doped LaMnO3 (LSM) which is known to have a high electronic conductivity but low ionic conductivity. To increase the ionic conductivity or diffusion of ions through the anode, Yttria-stabilized Zirconia (YSZ), which has good ionic conductivity, is proposed to be combined with LSM to create a...
متن کاملAnode acclimation methods and their impact on microbial electrolysis cells treating fermentation effluent
There is a lack of standardized acclimation procedures for evaluating treatability of different wastewaters, and such tests are often conducted using different types of microbial electrolysis cells (MECs). Two different types of MECs (mini or cube) were therefore acclimated using two different substrates (acetate or domestic wastewater) to see the impact of these procedures on the resulting tre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Mining and Metallurgical Institute of Japan
سال: 1958
ISSN: 0369-4194,2185-6729
DOI: 10.2473/shigentosozai1953.74.840_342