Anode fabrication for solid oxide fuel cells: Electroless and electrodeposition of nickel and silver into doped ceria scaffolds
نویسندگان
چکیده
منابع مشابه
Anode fabrication for solid oxide fuel cells: Electroless and electrodeposition of nickel and silver into doped ceria scaffolds
A novel fabrication method using electroless and electrodeposited Ni/Ag/GDC for SOFC anodes is presented. First a porous Ce0.9Gd0.1O2 x (GDC) scaffold was deposited on a YSZ electrolyte by screen printing and sintering. The scaffold was then metallized with silver using Tollens' reaction, followed by electrodeposition of nickel from a Watt's bath. The electrodes (Ni/Ag/GDC) were tested in both ...
متن کاملThermodynamic Stability of Gadolinia-Doped Ceria Thin Film Electrolytes for Micro-Solid Oxide Fuel Cells
Next-generation micro-solid oxide fuel cells for portable devices require nanocrystalline thin-film electrolytes in order to allow fuel cell fabrication on chips at a low operation temperature and with high power outputs. In this study, nanocrystalline gadolinia-doped ceria (Ce0.8Gd0.2O1.9!x) thin-film electrolytes are fabricated and their electrical conductivity and thermodynamic stability are...
متن کاملModel Development for Gadolinia- Doped Ceria-based Anodes in Solid Oxide Fuel Cells
Title of Document: MODEL DEVELOPMENT FOR GADOLINIADOPED CERIA-BASED ANODES IN SOLID OXIDE FUEL CELLS Lei Wang, Doctor of Philosophy, 2014 Directed By: Professor Gregory S. Jackson, Department of Mechanical Engineering Intermediate temperature (500 700 °C) solid oxide fuel cells (IT-SOFCs) with gadolinia-doped ceria (GDC) electrolytes have significant commercial potential due to reduced material...
متن کاملElectrochemically Deposited Ceria Structures for Advanced Solid Oxide Fuel Cells
As the pursuit towards emissions reduction intensifies with growing interest and nascent technologies, solid oxide fuel cells (SOFCs) remain an illustrious candidate for achieving our goals. Despite myriad advantages, SOFCs are still too costly for widespread deployment, even as unprecedented materials developments have recently emerged. This suggests that, in addition to informed materials sel...
متن کاملNovel Mg-Doped SrMoO3 Perovskites Designed as Anode Materials for Solid Oxide Fuel Cells
SrMo1-xMxO3-δ (M = Fe and Cr, x = 0.1 and 0.2) oxides have been recently described as excellent anode materials for solid oxide fuel cells at intermediate temperatures (IT-SOFC) with LSGM as the electrolyte. In this work, we have improved their properties by doping with aliovalent Mg ions at the B-site of the parent SrMoO₃ perovskite. SrMo1-xMgxO3-δ (x = 0.1, 0.2) oxides have been prepared, cha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Hydrogen Energy
سال: 2016
ISSN: 0360-3199
DOI: 10.1016/j.ijhydene.2016.04.061