Anode current saturation of ALD-coated Planacon® MCP-PMTs
نویسندگان
چکیده
منابع مشابه
Significantly improved lifetime of Microchannel Plate PMTs∗
The main particle identification devices of the PANDA experiment will be two DIRCs placed around (barrel) and downstream (disc) of the target. The preferred photon sensor option are microchannel plate (MCP) PMTs because they can be operated inside the 2 Tesla magnetic field of the solenoid. Furthermore, these multi-anode sensors are rather compact and show a superior time resolution which is ty...
متن کاملCross-talk suppressed multi-anode MCP-PMT
We have developed a 4-channel multi-anode MCP-PMT, SL10, which exhibits a performance of σTTS ≃ 30 ps for single photons with G ∼ 10 6 and QE = 20% under a magnetic field of B ≤ 1.5T . The cross-talk among anodes has been extensively studied. We have taken two measures to suppress it: one is to configure the SL10 to an effectively independent 4 small pieces of MCP-PMT’s by segmenting an electro...
متن کاملStudies of the performance of different front-end systems for flat-panel multi-anode PMTs with CsI(Tl) scintillator arrays
We have studied the performance of two different types of front-end systems for our gamma camera based on Hamamatsu H8500 (flat-panel 64 channels multi-anode PSPMT) with a CsI(Tl) scintillator array. The array consists of 64 pixels of 6× 6× 20mm which corresponds to the anode pixels of H8500. One of the system is based on commercial ASIC chips in order to readout every anode. The others are bas...
متن کاملSignal Recovery with PMTs
In general, the choice between boxcar averaging (gated integration) and lock-in detection (phase sensitive detection) is based on the time behavior of the signal. If the signal is fixed in frequency and has a 50 % duty cycle, lock-in detection is best suited. This type of experiment commonly uses an optical chopper to modulate the signal at some low frequency. Signal photons occur at random tim...
متن کامل[1031] Structural Characterisation of ALD coated Porous Si via Beam-Exit Cross-Sectional Polishing
Porous silicon (PS) samples with aspect ratios approaching 1:600 were conformally coated with Al O using atomic layer deposition (ALD). Beam-exit cross-sectional polishing (BEXP) was used to create shallow-angled cross-sections of the ALD coated samples, facilitating the study of the internal structure of the PS via scanning probe microscopy (SPM). ALD coating was found to be conformal along mu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Instrumentation
سال: 2018
ISSN: 1748-0221
DOI: 10.1088/1748-0221/13/09/t09001