Annular liquid film thickness prediction in a vertical 180° return bend
نویسندگان
چکیده
منابع مشابه
Experimental Study on Liquid Film Thickness of Annular Flow in Microchannels
Many studies were carried out to investigate the flow and heat transfer characteristics of two-phase flow in microchannels because of its advantage in improving heat exchange performance, it has been well revealed that liquid film thickness and flow pattern play important roles in determining the heat transfer characteristics. However, these data is still limited to understanding properties of ...
متن کاملThickness of residual wetting film in liquid-liquid displacement.
Core-annular flow is common in nature, representing, for example, how streams of oil, surrounded by water, move in petroleum reservoirs. Oil, typically a nonwetting fluid, tends to occupy the middle (core) part of a channel, while water forms a surrounding wall-wetting film. What is the thickness of the wetting film? A classic theory has been in existence for nearly 50 years offering a solution...
متن کاملCFD Model Validation and Prediction of Mist/Steam Cooling in a 180-Degree Bend Tubes
To achieve higher efficiency target of the advanced turbine systems, the closed-loop steam cooling scheme is employed to cool the airfoil. It is proven from the experimental results at laboratory working conditions that injecting mist into steam can significantly augment the heat transfer in the turbine blades with several fundamental studies. The mist cooling technique has to be tested at gas ...
متن کاملCharacterization of Liquid Film Thickness in Slug-Regime Microchannel Flows
An experimental investigation is conducted to examine the effects of operating conditions and channel size on the liquid film thickness of vapor bubbles in adiabatic air-water flows within the slug flow regime. Acrylic test sections are fabricated to contain a single microchannel of square cross-section with hydraulic diameters of 510 μm and 1020 μm. High-speed visualizations are used to map th...
متن کاملLiquid Film Thickness Estimation using Electrical Capacitance Tomography
In air/oil lubrication systems, the flow parameters, e.g., flow pattern, liquid film thickness, and air/oil flow rate, are of great importance to the transportation efficiency. In most cases, the on-going two-phase flow is annular flow with the oil moving along the tube wall and the air travelling at high speed in the center. This usually results in the formation of a thin oil film, the thickne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Experimental Thermal and Fluid Science
سال: 2018
ISSN: 0894-1777
DOI: 10.1016/j.expthermflusci.2018.03.006