Annealing Structure of Heavily Drawn Pearlite
نویسندگان
چکیده
منابع مشابه
Divorced Pearlite in Steels
Steels containing large carbon concentrations are used particularly when a large hardness is required, for example in the manufacture of components such as bearings. This, however, makes it difficult to shape or machine the alloys during the process of component manufacture unless they are first heat–treated into a softened condition. One method of achieving this economically is to generate a m...
متن کاملDevelopment of a strong Goss texture during annealing of a heavily rolled Al–0.3% Cu alloy
The evolution of microstructure and texture during isochronal annealing of a heavily cold rolled Al–0.3% Cu alloy has been characterized using electron backscatter diffraction. It is found that the rolling texture of this alloy is dominated by the Brass component and that recrystallization during annealing leads to the formation of a pronounced Goss texture. It is suggested that the development...
متن کاملStructural coarsening during annealing of an aluminum plate heavily deformed using ECAE
The microstructure and softening behaviour have been investigated in an aluminum plate heavily deformed by equal channel angular extrusion and subsequently annealed at 170 °C. It is found that at this temperature the microstructure evolves by coarsening with no apparent signs of recrystallization even after 2 h of annealing. Both coarsening and softening are rapid within first 10 minutes of ann...
متن کاملInfluence of annealing on anisotropic crystalline structure of HDPE cast films
High density polyethylene (HDPE) films were produced using cast film extrusion process with different draw ratios, ranging from 16.9 to 148.8. Morphology, crystallinty and orientation state of crystalline and amorphous phases of the cast films were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and polarized Fourier transform infrared spectroscopy...
متن کاملExtremely Fine Pearlite by Continuous Cooling Transformation
An extremely fine, fully pearlitic structure with an interlamellar spacing 30–50 nm has been obtained during continuous cooling transformation at a rate as low as 0.1 C s, of the steel that is normally used to produce nanostructured bainite. The solutes cobalt and aluminium have been added to accelerate the rate of reaction and reduce the interlamellar spacing by increasing the free energy of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1972
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.36.7_693