Annealing-Induced Hardening in Ultrafine-Grained Ni-Mo Alloys
نویسندگان
چکیده
منابع مشابه
Ultrafine-Grained Structure of Fe-Ni-C Austenitic Alloy Formed by Phase Hardening
The X-ray and magnetometry methods were used to study α-γ transformation mechanisms on heating quenched Fe-22.7 wt.% Ni-0.58 wt.% С alloy. Variation of heating rate within 0.03-80 K/min allowed one to switch from diffusive to non-diffusive mechanism of the α-γ transformation. Heating up primary austenitic single crystal specimen at a rate of less than 1.0-0.5 K/min has led to formation of aggre...
متن کاملAge Hardening of Ultrafine Grained Al-Ti-Cr Alloys Fabricated by Continuous Electron Beam Evaporation
Supersaturated Al-Ti-Cr alloys were produced by a continuous electron beam evaporation technique. The as-deposited alloy sheets were fcc supersaturated solid solution with an average grain size of about 400 nm. Due to the fine grain size, the hardness of the alloy was as high as 270Hv. The sheet showed age hardening, and the peak hardness of 340Hv was obtained after aging at 623K for 900 s, in ...
متن کاملRecovery of strain-hardening rate in Ni-Si alloys
In this study, the recovery of strain-hardening rate (RSHR) was discovered for the first time in polycrystalline materials (Ni-Si alloys) that have only dislocation activities during tensile test. Detailed microstructure characterizations show that the activation of dislocations in the secondary slip systems during tensile deformation is the major reason for this RSHR. By taking into account ot...
متن کاملMicroalloying Ultrafine Grained Al Alloys with Enhanced Ductility
Bulk ultrafine grained (UFG)/nanocrystal metals possess exceptional strength but normally poor ductility and thermal stability, which hinder their practical applications especially in high-temperature environments. Through microalloying strategy that enables the control of grains and precipitations in nanostructured regime, here we design and successfully produce a highly microstructure-stable ...
متن کاملInfluence of Mo alloying on the thermal stability and hardness of ultrafine-grained Ni processed by high-pressure torsion
The influence of Mo alloying on the thermal stability of grain size, dislocation density and hardness of ultrafine-grained (UFG) Ni alloys was studied. The UFG microstructure in alloys with low (∼0.3 at.%) and high (∼5 at.%) Mo contents was achieved by high-pressure torsion (HPT) performed for 20 turns at room temperature. The thermal stability of the two alloys was studied by calorimetry. A Cu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Engineering Materials
سال: 2018
ISSN: 1438-1656
DOI: 10.1002/adem.201800184