Anisotropic wet etching on the β‐phase poly(vinylidene fluoride) film
نویسندگان
چکیده
منابع مشابه
Wet anisotropic etching of polyimide
With the aim of developing flexible biocompatible implants for in vivo studies of nerve regeneration [1], fabrication of passive polyimide membranes using the commercial available Kapton film (100HN and 50HN, from DuPont) was investigated. Polyimide has been widely used in microelectronics, and its application possibilities have been widening to other fields such as micromachining and biomedica...
متن کاملWet anisotropic etching for fluidic 1D nanochannels
In this paper a method is proposed to fabricate channels for fluidic applications with a depth in the nanometer range. Channels with smooth and straight sidewalls are constructed with the help of micromachining technology by etching shallow trenches into 〈110〉 silicon using native oxide as a mask material and OPD resist developer as the etchant. Sub-50 nm deep fluidic channels are formed after ...
متن کاملAdvanced Surfactant-Modified Wet Anisotropic Etching
In the area of Micro Electro Mechanical Systems (MEMS), bulk micromachining and surface micromachining are two main technologies. Bulk micromachining defines structures by selectively etching inside a substrate while surface micromachining uses a succession of thin film deposition and selective etching on top of a substrate. The two technologies are quite different, resulting in different dimen...
متن کاملOptical Mems Devices Based on Wet Anisotropic Etching of Silicon
Optical MEMS found various applications over the last years due to the rapidly increasing data rates in optical networks. As standard single-mode fibers are used, the required alignment tolerances are below 1 μm for optical fiber. The assembly and reliability of MOEMS devices requires increasing attention. Additionally, the trend is going from single-functionality devices to more complex subsys...
متن کاملLevel Set Approach to Anisotropic Wet Etching of Silicon
In this paper a methodology for the three dimensional (3D) modeling and simulation of the profile evolution during anisotropic wet etching of silicon based on the level set method is presented. Etching rate anisotropy in silicon is modeled taking into account full silicon symmetry properties, by means of the interpolation technique using experimentally obtained values for the etching rates alon...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micro & Nano Letters
سال: 2020
ISSN: 1750-0443,1750-0443
DOI: 10.1049/mnl.2019.0304